Container Loading and Unloading Solutions

Truck-to-container work at the dock: low heads, tight spaces and pallets that must turn inside a steel box — walkie equipment at the box, counterbalance staging outside.

2.4 m
Approximate internal height a loaded dock truck must work under
685 mm
ST15 walkie pallet truck chassis width for dock doors and backroom lanes
±100 mm
AT-SS201 side shifter travel for pallet alignment at the box

Scenario challenges

What drives the spec here

Working under container heads

Loaded space inside a container leaves little mast or operator margin; the equipment that enters the box must be compact by design, not by compromise.

Turn time is the product

A container that clears in hours rather than days is the whole commercial point; every pallet move inside the box is on the critical path.

Floor transitions at the box

Dock plates and yard surfaces change under load; equipment and tires must take the transition without drama.

Selection logic

How to spec the fleet for this site

Decision factorWhat to check on siteHow this solution is specified
Door and container headroomMeasure the loaded internal height and the dock door clear height; the truck that enters must fit under both.Walkie equipment — the ST15 — does the in-box travel; counterbalance trucks stage outside the box.
Pallet turning inside the boxA pallet must often turn 90 degrees inside the container.The ST15’s compact 685 mm chassis turns in the space; a side shifter (AT-SS201) corrects the last 100 mm without re-approach.
Staging and yard flowPallets land outside the box and move to racking or trucks.The EP25 / EP30 counterbalance line moves staged pallets to the warehouse on 80 V lithium with opportunity charging.
Weight on dock platesDock plates have ratings; the equipment crossing them concentrates weight.Walkie axle loads are modest; counterbalance trucks cross plates unloaded or by route design.

Recommended models

Recommended models

['
\n \n

EP25 — 2.5 t Electric Counterbalance Forklift

\n

Dock-to-warehouse staging at 2,500 kg @ 500 mm, charging 0–80% in 2 h.

\n
  • Rated capacity 2,500 kg @ 500 mm
  • 80 V lithium (LiFePO4); 0–80% charge in 2 h
  • CE + TÜV Rheinland (battery system)
\n
', '
\n \n

ST15 — 1.5 t Electric Pallet Truck

\n

The in-box and dock-lane workhorse — 1.5 t, 685 mm chassis, electromagnetic braking.

\n
  • Rated capacity 1,500 kg
  • 24 V lithium, 60 Ah; 685 mm chassis
  • CE
\n
']

Cut container turn time at your dock

Send your container mix, dock dimensions and pallet profile — engineering responds within 12 hours on average.

Request a Quote

Other working scenarios

Cold storage, ports & heavy industry, warehousing, construction and farms — scenario-first matching across the range.

Related reading

The daily inspection checklist keeps dock equipment available, and the capacity worksheet sizes the staging fleet.